Feedstock recycling of waste polymers by thermal cracking in molten metal: thermodynamic analysis

Waste plastics contribute to serious environmental and social problems, such as the loss of natural resources, environmental pollution, and depletion of landfill space, but they also create demands on the environmentally-oriented part of the society. Feedstock recycling of scrap polymers by thermal and chemical methods is well known and environmentally accepted. The paper presents the results of thermodynamic analysis of the conversion of polyolefins in a fuel-like mixture of hydrocarbons using thermal cracking in a new type of tubular reactor with molten metal. Evaluation of the efficiency of the process was based on exergy calculations. Calculated exergy efficiency was ca. 79.5 %. It means that feedstock recycling of waste is better from an energetic and environmental point of view than other processes, particularly incineration.     

Hydrological and environmental conditions as key drivers for spatial and seasonal changes in PCDD/PCDF concentrations, transport and deposition along urban cascade reservoirs

To investigate the drivers for transport and deposition of 17 2,3,7,8-substituted PCDDs/PCDFs along an urban river, water samples from five reservoirs located along the river course were collected in January and July 2008. The concentrations of 17 congeners of PCDD/PCDF were determined and compared to environmental - physical, chemical and biological - conditions. The obtained data revealed that the concentration of the sum of toxic PCDDs/PCDFs in water samples differ between reservoirs as well as between seasons, ranging from 12.04 pg L(-1) in UP (first in the cascade) to 1327.94 pg L(-1) in PR (last in the cascade) during winter of 2008; and from 34.94 pg L(-1) in UP to 1352.50 pg L(-1) in TR (next to last) in summer 2008. In comparison, water samples collected from the river had a concentration several times lower at the first two sites (sites no. 1 and 4) and no detectable values at the last three stations (sites no. 7, 8, 10). The obtained data demonstrated strong or moderate correlations between the sum of 17 PCDDs/PCDFs and TEQ in reservoir water samples and physical, chemical and biological conditions, such as: Mg(2+) (R=0.82; R=0.80, respectively), SO(4)(2-) (R=0.80; R=0.80, respectively), K(+) (R=0.80; R=0.80, respectively), Ca(2+) (R=0.67, R=0.70, respectively), OSM (R=0.63, R=0.70, respectively). In addition, the positive strong correlation between TEQ concentrations and the water temperature (R=0.63) and chlorophyll a content (R=0.90) was noted. The violent weather conditions occurred during the research season with periods of intensive storm events (up to 32 mm in mid July), and thus the increased river flow velocity (up to 0.45 m(3)s(-1)) could have a direct and indirect influence on PCDDs/PCDFs concentration through changes in the sedimentation/resuspension ratio and consequently in transport, deposition and degradation processes along the river/reservoirs.     

Anaerobic Biodegradation of Polymer Composites Filled with Natural Fibers

Polymer composites with natural fibers prepared by melt blending were investigated. Synthetic and natural macromolecules were used, including poly(lactic acid), polyhydroxybutyrate-co-polyhydroxyvalerate and low density polyethylene. These polymers were filled with flax fibers. Mechanical properties of the composites, biogas production and mass loss under anaerobic digestion have been presented. It has been shown that the mechanical properties sustain after 28 days of biodegradation. Such materials can be found in applications as packaging, as well as in medicine as polymeric scaffolds, and drug delivery systems etc.     

Spatial distribution of trace elements and ecotoxicity of bottom sediments in Rybnik reservoir,Silesian-Poland

Environmental Science and Pollution Research - The aim of study was to integrate chemical analyses and toxicity bioassays in order to assess the environmental risk connected with the presence of...     

Multi-elemental analysis of Lentinula edodes mushrooms available in trade

ABSTRACT

The present study investigated the content of 62 elements in the fruiting bodies of Lentinula edodes (Shiitake mushroom) cultivated commercially in Poland on various substrates from 2007–2015. The general mean content (mg kg^?1 dry weight (DW)) of the studied elements ranked in the following order: K (26,335) > P (11,015) > Mg (2,284) > Ca (607) > Na (131) > Zn (112) > Fe (69) > Mn (33) > B (32) > Rb (17) > Cu (14.5) > Al (11.2) > Te (2.9) > As (1.80) > Cd (1.76) > Ag (1.73) > Nd (1.70) > Sr (1.46) > Se (1.41) > U (1.11) > Pt (0.90) > Ce (0.80) > Ba (0.61) > Co (0.59) > Tl (0.58) > Er (0.50) > Pb (0.42) > Li (0.40) > Pr (0.39) > Ir (0.37) > In (0.35) > Mo (0.31) > Cr (0.29) > Ni (0.28) > Sb (0.26) > Re (0.24) > Ti (0.19) > Bi (0.18) > Th (0.12) > La (0.10) = Pd (0.10) > Os (0.09) = Zr (0.09) > Rh (0.08) > Ho (0.07) > Ru (0.06) > Sm (0.04) = Eu (0.04) = Tm (0.04) > Gd (0.03) > Sc (0.02) = Y (0.02) > Lu (0.01) = Yb (0.01) = V (0.01). The contents of Au, Be, Dy, Ga, Ge, Hf, and Tb were below the limits of detection (0.02, 0.02, 0.01, 0.01, 0.01, 0.01, 0.02 mg kg^?1 respectively). The concentrations of Al, As, B, Ba, Ca, Cd, Cr, Er, Fe, In, Lu, Mn, Nd, Sr, Ti, Tm, and Zr were comparable over the period the mushrooms were cultivated. The study revealed that Lentinula edodes contained As and Cd at levels potentially adverse to human health. This highlights the need to monitor these elements in food products obtained from this mushroom species and ensure that only low levels of these elements are present in cultivation substrates.     

Sperm storage and mating in the deep-sea squid Taningia danae Joubin, 1931 (Oegopsida: Octopoteuthidae)

Spermatangium implantation is reported in the large oceanic squid Taningia danae, based on ten mated females from the stomachs of sperm whales. Implanted spermatangia were located in the mantle, head and neck (on both sides) or above the nuchal cartilage, under the neck collar and were often associated with incisions. These cuts ranged from 30 to 65 mm in length and were probably made by males, using the beak or arm hooks. This is the first time wounds facilitating spermatangium storage have been observed in the internal muscle layers (rather than external, as observed in some other species of squid). The implications of these observations for the mating behavior of the rarely encountered squid T. danae are discussed.     

Second generation diesel fuel from renewable sources

The study is devoted to the issue of direct transformation of triacylglycerols (TAG) to diesel fuels applying a commercially available NiMo and NiW hydrorefining catalysts. It was proved that during hydrodesulphurisation also hydrodeoxygenation occurs and TAG can be converted to the fuel biocomponent by adding 6.5 % vol. of TAG to atmospheric gas oil. In this way, after hydroprocessing at mild conditions (temperature 320–360 °C, pressure 3.5–5.5 MPa, LHSV: 1.0 h^?1 and ratio H₂:HC = 500–1000 Nm³/m³, catalyst presence), gas oil containing 5–5.5% of biocomponent was prepared, characterized with standard performance and emission parameters. Performance and emission tests documented that even 5% vol. portion of bio-components reduces the controlled and uncontrolled emissions.     

From feathers to syngas - technologies and devices

The poultry waste produced by industrial slaughterhouses typically contains not only feathers, but also a mixture of animal entrails, nails, blood, beaks and whole carcasses. Economical utilisation of this mixture, varying strongly in composition and moisture content, is, in general, difficult. We demonstrate that this awkward material can be successfully used for gasification in a simple, fixed-bed gasifier. The method of gasification, which we developed, enables control of the gasification process and ensures its stability in the operational regime of a working poultry processing plant. The installation, which has been working in Poland for 2 years, utilises 2 tons of feathers per hour and produces syngas of stable composition and fairly high quality. The syngas is burnt in the combustion chamber adjacent to the gasifier. Heat is recuperated in a boiler producing 3.5 tons per hour of technological steam continuously used for the operation of the slaughterhouse. The whole process complies with the stringent emission standards. In the paper we present the end-use device for feather utilisation and describe the underlying gasification and syngas combustion processes. Key elements of the whole installation are briefly discussed. The environmental impacts of the installation are summarized.